Clock Part 3

Finally finished the clock case.

I finally finished the outer case of my clock. Only 19 layers of 3mm acrylic stacked on top of each other. I built a finger slot into the back of the clock so it’s easier to carry, but also to house the barrel jack for¬†mounting the clock flush to the wall, allowong me to hide… Continue reading Clock Part 3

Clock Part 2

Previously‚Ķ A bit more progress on my clock. I installed the dirty pink gel filter to increase the contrast ratio of the 7 segment displays, and started cutting the final case out of red 101 acrylic. Lots of laminations.